SF6 Ring Main Unit Transformer Switch Cabinet with ABB MCCB
MNS Draw-out Switchgear
MNS low voltage whole set draw-out switchgear - hereinafter referred to as "switchgear" - is an assembling low voltage switchgear which has features of flexible structure, modular installation, multifunctional, reliable and safe performance. It can be used in fields like metallurgy, petroleum industry, chemical engineering, industrial and mining enterprises for power distribution and control etc. It is suitable for AC 50~60Hz, rated voltage 380V (400V), (600V), rated current 4000A and below power system.
The LV Switchgear conforms to IEC60439-1, GB7251 "LV Switchgear and control gear" standard and CCC certification.
Normal Use-condition
Ambient air temperature: maximum 40ºC, minimum -5ºC.
Air Condition: clean, humidity must be under 50% at the maximum temperature 40ºC, higher humidity is permitted at lower temperature.
Altitude must be below 2000m.
Surrounding air must not be obviously affected by dusts, smoke, corrosive or combustible gas and liquid.
Equipment installation place must not be under severe vibration and impact.
Equipment installation gradient must be less than 5ºC against its vertical plane.
PS: Any special requirements of yours can be discussed with us at any time.
MNS Definition
M-Standard Module
N-Low Voltage Draw-out Type
S-Switch Distribution Equipment
Product Standard:
GB75251.1
IEC 60439-1
CCC
Our Factory
MNS Draw-out Switchgear
MNS low voltage whole set draw-out switchgear - hereinafter referred to as "switchgear" - is an assembling low voltage switchgear which has features of flexible structure, modular installation, multifunctional, reliable and safe performance. It can be used in fields like metallurgy, petroleum industry, chemical engineering, industrial and mining enterprises for power distribution and control etc. It is suitable for AC 50~60Hz, rated voltage 380V (400V), (600V), rated current 4000A and below power system.
The LV Switchgear conforms to IEC60439-1, GB7251 "LV Switchgear and control gear" standard and CCC certification.
Normal Use-condition
Ambient air temperature: maximum 40ºC, minimum -5ºC.
Air Condition: clean, humidity must be under 50% at the maximum temperature 40ºC, higher humidity is permitted at lower temperature.
Altitude must be below 2000m.
Surrounding air must not be obviously affected by dusts, smoke, corrosive or combustible gas and liquid.
Equipment installation place must not be under severe vibration and impact.
Equipment installation gradient must be less than 5ºC against its vertical plane.
PS: Any special requirements of yours can be discussed with us at any time.
MNS Definition
M-Standard Module
N-Low Voltage Draw-out Type
S-Switch Distribution Equipment
Product Standard:
GB75251.1
IEC 60439-1
CCC
Our Factory